Long Products

Long Products

• Round Bars

Hot rolled bars rounds.
In order to prevent rustwe recommend shot pining and then painting.
General and mechanical use.

SAE	1010	1026	1040	1045	4140	8620	12L14
Diameter			Section		Weight
MM	Inches		cm2		kg/m
7.94	5/16		0.49		0.39
9.53	3/8		0.71		0.56
11.11	7/16		0.97		0.76
12.70	1/2		1.27		0.99
14.29	9/16		1.60		1.26
15.88	5/8		1.98		1.55
17.46	11/46		2.39		1.88
19.05	3/4		2.85		2.24
20.64	3/16		3.35		2.63
22.23	7/8		3.88		3.05
25.40	1		5.07		3.98
26.59	1-3/64		5.55		4.36
26.99	1-1/16		5.72		4.49
28.58	1-1/8		6.41		5.03
31.75	1-1/4		7.92		6.22
34.93	1-3/8		9.58		7.52
38.10	1-1/2		11.40		8.95
41.20	1-5/8		13.38		10.50
44.45	1-3/4		15.52		12.18
50.80	2		20.27		15.91
52.39	2-1/16		21.55		16.92
53.98	2-1/8		22.88		17.96
57.15	2-1/4		25.65		20.14
63.50	2-1/2		31.67		24.86

• Flat Bars

Hot rolled flat bars.
General use: metallic structure, agro machine and industry.
Industrial use: tools and machinery.

• Reforcing Bars

High yield strength is obtained by chemical composition in ladle furnace follows by continuous casting and hot rolling.
It use for concrete reinforcement, its is (Bond fish) international deformation, assumes excellent results in bond strength tests.
All these properties, make this steel entirely suitable for bending, according international standards.

Diameter	Bar weight/12 mt
4.2	1.30
8	4.80
10	7.40
12	10
14	14.40
16	18.90
20	29.60
25	46.20

• Profiles

U.P.N.

		Thickness
Alt.	Ala	Alma	Ala	Peso kg/m
40	20	5	5	2,84
50	25	5	6	3,8
50	38	5	7	5,59
60	30	6	6	5,3
65	42	5,5	7,5	7,09
80	45	6	8	8,64
100	50	6	8,5	10,6
120	55	7	9	13,35
140	60	7	10	16,01
160	65	7,5	10,5	18,84
180	70	8	11	21,98
200	75	8,5	11,5	25,28
220	80	9	12,5	29,36
240	85	9,5	13	33,21
260	90	10	14	37,92
280	95	10	15	41,84
300	100	10	16	46,16
320	100	14	17,5	59,5
350	100	14	16	60,6
380	102	13,5	16	63,1
400	110	14	18	71,8

I.P.N.

		Thickness
Alt.	Ala	Alma	Ala	Peso kg/m
80	42	3,9	5,9	5,95
100	50	4,5	6,8	8,32
120	58	5,1	7,7	11,15
140	66	5,7	8,6	14,37
160	74	6,3	9,5	17,9
180	82	6,9	10,4	21,9
200	90	7,5	11,3	26,3
220	98	8,1	12,2	31,09
240	106	8,7	13,1	36,19
260	113	9,4	14,1	41,92
280	119	10,1	15,2	47,96
300	125	10,8	16,2	54,2
320	131	11,5	17,3	61,1
340	137	12,2	18,3	68,1
360	143	13	19,5	76,2
380	149	13,7	20,5	84
400	155	14,4	21,6	95,68
450	170	16,2	24,3	115,4
500	185	18	27	141,3
550	200	19	30	167,21
600	215	21,6	32,4	199

H.E.B.

• Rails

• Wire Rod

Wire rod is the basis of all steel wire, rope and fencing products. The most important characteristic for determining a rod’s end use is its draw ability; the extent to which the rod’s diameter can, or needs to be easily reduced during the drawing process.

• Structural Tubes

Welded tubes are produced by welding together a hot rolled coil to form a tube or pipe. They are used in the construction, energy, mechanical and general engineering industries.

Nominal Diameter		Nominal Thickness	Theoretical weight	Hydraulic test	SCH N°	Tube/package
Inch	mm	mm	kg/m	Bar
1/2	21,3	2,77	1,27	50	40	127
3/4	26,7	2,87	1,69	50	40	91
1	33,4	3,38	2,5	50	40	61
1 1/4	42,2	3,56	3,39	84	40	61
1 1/4	42,2	4,85	4,47	125	80	37
1 1/2	48,3	3,68	4,05	84	40	37
1 1/2	48,3	5,08	5,42	125	80	37
2	60,3	3,91	5,44	162	40	37
2	60,3	5,54	7,49	173	80	24
2 1/2	73	5,16	8,63	173	40	19
3	88,9	5,49	11,29	156	40	10
4	114,3	6,02	16,07	133	40	10
6	168,3	(*)

Round Tubes

		COLD ROLLED				HOT ROLLED
Diameter		Thickness				Thickness
mm	Inch	0,70/0,80	0,90	1,25	1,60	2,00	3,20	4,75	6,35
22,22	7/8	✓					✓	✓	✓
25,40	1	✓						✓	✓
31,75	1 1/4	✓						✓	✓
38,10	1 1/2	✓						✓	✓
44,45	1 3/4	✓						✓	✓
50,80	2	✓						✓	✓
57,15	2, 1/4	✓						✓	✓
63,50	2 1/2	✓
76,20	3	✓
88,90	3 1/2	✓	✓	✓
101,60	4	✓	✓	✓
114,30	4 1/2	✓	✓	✓
127,00	5	✓	✓	✓
168,30	6 5/8	✓	✓	✓	✓	✓

Square tubes

		COLD ROLLED				HOT ROLLED
Diameter		Thickness				Thickness
mm	Inch	0,70/0,80	0,90	1,25	1,60	2,00	3,20	4,75	6,35
20×20	25,4	✓						✓	✓
25×25	31,75	✓						✓	✓
30×30	38,1	✓						✓	✓
40×40	50,8	✓						✓	✓
50×50	63,5	✓
70×70	88,9	✓	✓	✓
80×80	101,6	✓	✓	✓
90×90	114,3	✓	✓	✓
100×100	127	✓	✓	✓

Rectangular tubes

		COLD ROLLED				HOT ROLLED
Diameter		Thickness				Thickness
mm	Inch	0,70/0,80	0,90	1,25	1,60	2,00	3,20	4,75	6,35
20×30	31,75	✓						✓	✓
20×40	38,1	✓						✓	✓
20×50	44,45	✓						✓	✓
30×40	44,45	✓						✓	✓
20×60	50,8	✓						✓	✓
30×50	50,8	✓						✓	✓
40×50	57,15	✓						✓	✓
20×70	57,15	✓						✓	✓
30×60	57,15	✓
40×60	63,5	✓
30×70	63,5	✓
40×80	76,2	✓
60×60	76,2	✓
50×90	88,9	✓	✓	✓
40×100	88,9	✓	✓	✓
60×80	88,9	✓	✓	✓
50×100	92,25	✓	✓	✓
60×100	101,6	✓	✓	✓
40×120	101,6	✓	✓	✓
60×120	114,3	✓	✓	✓
80×100	114,3	✓	✓	✓
50×150	127	✓	✓	✓
80×120	127	✓	✓	✓
60×140	127	✓	✓	✓

• Angles

Angles hot rolled equal legs can be welded.
General use mechanical steel structure /machinery.

mm		3,17	4,76	6,35
	Inch	1/8	3/16	1/4
15,90	5/8	✓
19,10	3/4	✓
22,20	7/8	✓
25,40	1	✓	✓
31,70	1 1/4	✓	✓
38,10	1 1/2	✓	✓
44,40	1 3/4	✓	✓
50,80	2	✓	✓	✓
57,20	2 1/4		✓	✓
63,50	2 1/2		✓	✓

• Billets

Steel billets result from the first stage of the steel production process.
They are used for the manufacture of all ‘long’ steel products.
They are commonly termed a semi-finished product as they require further production before end use.